What is a burner?

Burner in the mainland called programmer. Because Taiwan's semiconductor industry developed early, to the mainland, the reason why customers call it "programmer" because now the English name is PROGRAMMER, the English name and general writing software programmers is the same name, so it is called "programmer! Programmer". Burner is actually a programmable integrated circuits to write data on the tool, burner device is mainly used for microcontroller (including embedded) / memory (including BIOS) and other chip programming (or brush writing). Burner in the function can be divided into universal type burner, mass production type burner, special type burner. Dedicated burners are the least expensive, applicable to fewer types of chips, suitable for a particular type or a class of specialized chip programming needs, such as the need to program only the PIC series. Full-featured general-purpose type can cover almost (not all) all the current need to program the chip, due to the design of the trouble, the cost is higher, limiting the sales, and ultimately the price is very high, suitable for the need to program a variety of chips.

What is the principle of IC burn-in?

The principle of burner is to program the chip that can be programmed, within the permitted timing range, to put a flurry of 010101 data, by way of powering up the chip to operate, change the internal 010101 structure of the chip, so as to achieve the desired effect.ZLG Zhiyuan Electronics SmartPRO 5000U-PLUS series burner can stably support MCU, Nor Flash, FPGA, CPLD and other chips. Actually: not all ICs can be burned, only memories can be burned. But now many microcontrollers have integrated program memory, so microcontrollers can also be burned. Memory is a lot of internal MOS tubes, MOS tube gate voltage charge is very difficult to release (up to save more than 10 years), that is, the gate voltage of the MOS tube is the memory function. Burning, the program is in the form of binary (0 low and 1 high), the chip's internal corresponding MOS tube gate charge or discharge, the formation of data preservation. For example: a scurry of 00000001 data to the memory, MOS gate for charge and discharge preservation, the first 0000000 seven corresponding MOS tube discharge to the low-level form of preservation, the last 1, is to give the MOS tube gate to charge the form of preservation. So that the eight MOS tubes to save 00000001 of this tampering with the data. Read, MOS tube gate discharge output for O, charging output for 1, will be a series of data reading output. Microcontroller work is first read program memory data, and then is completely in accordance with the program data to work; when the microcontroller memory burned different programs, microcontroller work is not the same.

Basic working principle of programmable controller:

Programmable controller (PLC) work has two main points: in and out of the information transformation, reliable physical realization

  Incoming and outgoing information transformation is mainly realized by running the program stored in the PLC memory. This program is both system (this program is also known as the monitoring program, or operating system) and user. The system program for the user program to provide editing and running platform, at the same time, but also to carry out the necessary public processing, such as self-test, I / O refresh, and peripherals, host computer or other PLC communications and other processing. The user program is designed by the user in accordance with the requirements of the control. What kind of control, there is what kind of user program.

Reliable physical realization is mainly through the input (I, INPUT) and output (O, OUTPUT) circuits. For each input or output point there is an I or O circuit. Moreover, several such circuits are always integrated in a module (or box), which is then integrated into the complete I/O system (circuit) of the PLC. Despite the fact that these modules are quite numerous and account for most of the PLC's volume, the PLC is still not too large because they are all highly integrated by the...

NOVAFLASH - Inline Burner

Novaflash ISP Customer Access: Become a Novaflash customer and get free access to the latest documentation and download the latest files from the area.

Novaflash Features:

Integration - easy to integrate ISP functionality into a single fixture or ATE, the best choice!

Flexibility - Hydra can program multiple devices at the same time, through multiple breakaway units connected to the same host.

Versatility - Compatible with existing devices on the market, e.g. Takaya flying probe, Teradyne ICT devices, etc.

Reasons and advantages why customers choose Novaflash:

1- novalink (1Gps, LAN Cable,Not, ISP Line)

2- GRP File (Only ONE File)

3- Provide the Real time Log information

4- GRP file and original Data File CRC value (Two offers)/ Data File and Source Inspection can be verified

5- TCK: MAX 50Mhz

6- Provide Utilities together for the Engineer & Production

7- AS Warranty 3years

8- Free of Charge for Development Device Driver

9- UUT Real time monitoring